Share this site with your friends
Natea : Total D/X to direct condensation heat pump |
|
The three Natea ranges of geothermal heat pumps – each simple, economical and environmentally friendly – capture the heat energy present in the earth.
Since the launch of its fifth generation of Natea geothermal heat pumps in 2005, Sofath has become the reference standard for direct condensation and evaporation technology.
Technical description
Natea, using Sofath’s direct condensation and evaporation ground/ground technology, is the most widespread solution in France, as it is easy to fit and provides optimum output.
Heat is taken from the ground via a polyethylene-coated copper tube collector, inside which the refrigerant circulates. This collector, in the shape of a coil, is buried around 60 cm underground, over an area of 100% to 150% of the surface to be heated.
Useable heat is sent inside the house via an underfloor heating system.
Natea is suitable for heating any type of new house, wherever you live.
|
 |
Technical features
| |
MT 2.10 |
MT 4.10 |
MT 5.10 |
MT 7.10 |
MT 9.10 |
MT 11.10 |
| Heating capacity (W)* |
2 300 |
4 000 |
5 500 |
7 200 |
9 500 |
11 300 |
| Refrigerant |
R410A |
R410A |
R410A |
R410A |
R410A |
R410A |
| Single-phase (230 V) |
* |
* |
* |
* |
* |
|
| Three-phase (400 V) |
|
* |
* |
* |
* |
* |
| Collector type |
Horizontal |
Horizontal |
Horizontal |
Horizontal |
Horizontal |
Horizontal |
| No. of collector coils |
1 |
2 |
3 |
4 |
5 |
6 |
* Heating capacity calculated using conditions E-1°C //C +30/35°C
Options
Domestic hot water, cooling, pool heating (except for the MT2, MT4)
Twitter
Google bookmarks
Facebook
Yahoo bookmarks
Myspace
Delicious
Friendfeed
Digg
